Proxy IP Address => IP address of the Asterisk server Subnet Mask => Set to the correct netmask for your local networkĭefault Gateway Address => Gateway IP address for your LAN IP Address => IP address of the AudioCodes 124 Then run your web browser and point it to and login usingĬlick -> “Quick Setup” and change the following: Then configure the IP address of the computer to 10.1.10.XXX (anything but 10 or 11). progressinband=no Polycom phones don’t work properly with “never”Ĭreate dialplan entries in nfĮxten => 1001,1,Dial(SIP/1001|25) AudioCodes Setup:Ĭonnect the gateway to a network switch and connect a computer to the same Host=dynamic This peer register with usĭtmfmode=inband Choices are inband, rfc2833, or infoĪllow=ulaw dtmfmode=inband only works with ulaw or alaw! A typical basic entry would look like below.Ĭontext=local Context for incoming calls for this user Just create standard type=friend extensions for as many phone extensions as you would like to create in sip.conf. Setup your network accordingly to access the default address. AudioCodes uses the network address 10.1.10.10 for FXS and 10.1.10.11 for FXO gateways. A quick and dirty configuration for a vanilla Asterisk setup. This will be the last in the AudioCodes setup series.

Asterisk dtmf